ARPA-E Funding Drives Innovation, Industry Partnerships at NREL | News

ARPA-E Energy Innovation Summit To Showcase NREL’s Disruptive Energy Technology Research


NREL researcher Aaron Ptak discusses a new reactor in NREL’s Science and Technology
Facility. Ptak is the lead on NREL’s dynamic hydride vapor phase epitaxy effort, for
which ARPA-E funding has been crucial. Photo by Werner Slocum, NREL

Among the National Renewable Energy Laboratory’s (NREL’s) many funding agencies, the
U.S. Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E) funds
what is perhaps some of NREL’s most innovative work. ARPA-E’s mission is to advance
promising technologies that are not yet ready for private-sector investment, with
the goal of developing new ways to generate, store, and use energy. The high-risk,
high-reward nature of these projects is what makes them so exciting—and what requires
NREL researchers to use their most creative problem-solving approaches.

This year, ARPA-E-funded projects will be showcased at the 12th annual ARPA-E Energy Innovation Summit, to be held on May 23–25 in Denver, Colorado. In the lead-up to the summit, NREL
researchers are reflecting on the ways in which ARPA-E funding has allowed them to
advance innovative research and develop robust industry partnerships.

Since 2009, ARPA-E has provided approximately $2.93 billion in R&D funding for more
than 1,270 potentially transformational energy technology projects. NREL has played
a key role in many of these projects, ranging from developing new solar cell material growth techniques and improving grid
control to reducing energy use in transportation. In the five ARPA-E projects featured here, NREL’s collaborative, partnership-oriented
approach has been crucial.

“ARPA-E proposals are among the most cross-cutting, innovative technologies. That’s
what makes them so exciting,” said Kirstin Alberi, who serves as the ARPA-E point
of contact for NREL. “[The projects below] represent the many ways NREL is partnering
with industry to advance disruptive technologies.”

Energy Storage Technology Heats Up

NREL’s ARPA-E ENDURING project is aimed at developing low-cost long-duration thermal
energy storage. Illustration by Jeffrey Gifford and Patrick Davenport, NREL

Principal Investigator Zhiwen Ma and his team are in the final stages of their ARPA-E
project, ENDURING (Economic Long-Duration Electricity Storage by Using Low-Cost Thermal Energy Storage
and High-Efficiency Power Cycle
), aimed at developing a new, low-cost technology for long-duration thermal energy
storage. This technology is poised to have far-reaching impacts; it has applications
in transportation and industry, and it ultimately aims to compete with natural gas.

The idea for the project originated over a decade ago. “At first, everyone challenged
this method of converting electricity back to heat,” said Ma, who is a senior mechanical
engineering researcher. But with the electrification of the energy sector and more
abundant renewable electricity becoming available, thermal energy began to make more
and more sense in the broad decarbonization of the economy.

“Our technology focuses on using low-cost silica sand to provide broad application
potentials for integrating renewable generation,” Ma said. “This is in contrast to
molten salt energy storage, which is challenging because it freezes at low temperatures
and can decompose at high temperatures.”

Ma and his team persevered, and in 2018, the project received nearly $2.8 million in funding over three years from ARPA-E.

The ENDURING technology works by heating stable, low-cost solid silica particles—which,
unlike molten salts, are stable at both high and ambient temperatures—to over 1,000
degrees Celsius. This charging process happens when electric power is cheapest, allowing
the resulting energy to be stored for several days in large storage modules. To discharge
this energy, the hot particles are fed through a heat exchanger, ultimately driving
an electric generator.

This type of long-duration stationary energy storage is key to improving the resiliency
of the grid, integrating more intermittent renewable energy resources such as wind
and solar, and improving these renewable resources’ reliability.

And now, this technology is becoming a reality.

“The project is wrapping up this spring, and we’re now looking to get it out of lab
scale and into pilot scale,” Ma said. “We have received some follow-up funding, and
the potential next step is to develop a pilot facility with our industry partners
in a site adjacent to NREL’s Flatirons Campus.”

Industry partnership has been crucial throughout the project and is perhaps one of
the most exciting aspects of the work.

“We’re helping a traditional coal company move into a new energy area, and they’re
very excited about that,” Ma said. “Our partnership is helping them to reshape their
vision and get into things that will blossom in the next 10, 15, 20 years.”

Drilling Down Into Next-Generation Energy Resources

Geothermal energy is a vast, untapped source of clean electricity. Photo from San Federico, Geothermal Resources Council Photo Contest 2019

Jody Robins and his team are utilizing ARPA-E funding to tap into a vast, untapped
source of clean electricity—geothermal energy. Geothermal rock is harder, higher-temperature,
and less porous than the rock typically found in oil and gas wells, making drilling
more difficult and expensive.

Their project, RePED 250: A Revolutionary, High-Drilling Rate, High-T Geothermal Drilling System
and Companion (250°–350°C) Power Electronics
, aims to change that by increasing drilling speeds and reducing costs.

The ultimate goal is to enable drilling of engineered geothermal system (EGS)-type
wells, which offer significant potential for expanding geothermal energy.

“EGS is geothermal that can be drilled anywhere—it would mean that geothermal would
no longer be limited to the western United States,” said Robins, a senior geothermal
engineer at NREL. “For the geothermal industry, it would be a massive change, and
it would be an always-on complement to solar and wind.”

The team received nearly $5 million in ARPA-E funding in September 2019 (the initial application was developed by Kate Young, and Robins joined the project
after the application had been submitted).

“The technology is risky, so ARPA-E was the logical place to go for funding,” Robins
said.

Apart from some supply-chain delays, the project has been progressing rapidly, with
some pleasant surprises along the way. “We thought there would be significant redesign
necessary to drill through granite, because it’s so much harder and lower porosity.
It was a big surprise, but a welcome one, to find out that this wasn’t necessary.”

As with NREL’s other ARPA-E projects, industry collaboration is a key focus.

“Most of the competing methods require huge changes to the drilling rigs at the surface,”
Robins said. “This one doesn’t. For people used to drilling, not much will change.
If we’re successful, there’s a good chance [industry] will try it out. Commercialization
is always the question, and we’ve got a good shot at it being widely deployed.”

Devon Kesseli, a researcher in the Thermal Energy Science and Technologies Group at
NREL, is now poised to lead this project in its next steps.

Enabling Fast Growth and Low Costs for Multijunction Solar Cells

Dynamic hydride vapor phase epitaxy applies a simple solution to deposit the abrupt,
clean layers needed for a high-quality III-V semiconductor. By quickly moving the
crystal between chambers that contain different gases, the switch in composition of
the growing crystal is immediate. Graphic by Al Hicks, NREL

III-V semiconductors are the best available for many telecommunications, solar energy,
and electronics applications. But high costs and low production volumes have long
constrained the growth of this technology. For example, III-V solar cell manufacturing
is measured in kilowatts per year (compared to gigawatts per year for silicon solar
cells)..

Led by senior scientist Aaron Ptak, NREL and industry partners are developing the
dynamic hydride vapor phase epitaxy (D-HVPE) process to enable the mass production
of III-V semiconductors. Like many great inventions, D-HVPE is the result of re-envisioning
a persistent problem as an opportunity. HVPE was one of the first processes used to
grow III-V semiconductors, but it was mostly abandoned because its fast growth made
it difficult to control and form abrupt interfaces.

“Everyone recognized in decades past that HVPE was a great technique for growing really
high-quality materials, but it wasn’t super useful. You couldn’t use it to make complex
device structures like transistors or lasers or high-efficiency solar cells. Our challenge
was to figure out how to make HVPE useful for these applications,” Ptak said.

The D-HVPE team at NREL turned HVPE’s fast growth to an advantage by developing a
reactor with multiple chambers, allowing the team to abruptly change which elements
are growing on the crystal. Not only does this enable cheaper, faster growth, but
it perfectly sets the stage for a transition to high-throughput, in-line production.

ARPA-E funding was a critical in developing this innovation. The ARPA-E High-Efficiency PV Cells project funding period is now over, but the demonstration of using HPVE to grow high-efficiency
PV cells was important because it helped to test a use case for HPVE.

“ARPA-E support was critical for us,” Ptak said. “Not only did it allow us to understand
and refine the technology, but ARPA-E’s focus on tech-to-market activities allowed
us to go out and talk to people and show that, if successful, people in the real world
would care about what we’re doing.”

NREL is now working with several industry partners to commercialize the D-HVPE process
for III-V solar cells. Kyma Technologies, a U.S.-based small business and producer
of HVPE equipment for other materials, was competitively selected to work with NREL
to design a pilot-scale production line. Ceres, another U.S. small business, is partnered
with Kyma to construct the pilot line. Kyma and Ceres will host a factory acceptance
test of the pilot reactor in May 2022 in anticipation of a delivery to NREL in July.

Bringing Floating Offshore Wind Design Into Deeper Waters

NREL’s ARPA-E WEIS project is developing a toolset to optimize the design of floating
offshore wind turbines. Photo by Senu Sirnivas, NREL

Optimizing new wind energy technologies and reducing the cost of wind energy are critical
to meeting the United States’ ambitious decarbonization goals—in particular, the Biden administration’s 30 GW by 2030 goal for offshore wind. To further that effort, Alan Wright and his team at NREL are developing a new toolset,
called Wind Energy With Integrated Servo-Control (WEIS), to optimize the design of both conventional and novel floating offshore wind turbines.
This toolset uses a technique called control co-design to achieve reduced costs and
improved designs.

“In systems design, things are done sequentially—maybe the rotor is designed first,
then the drivetrain, then the generator, then the platform, and so on. The objective
of control co-design is to do all of that concurrently,” said Wright, a control engineering
researcher at NREL and principal investigator of the WEIS project. “Optimizing the
components, including the controller, together allows you to realize cost reductions
and lighter, more flexible components.”

With $2.7 million in ARPA-E funding, Wright and his team—including co-PIs Garrett
Barter, Jason Jonkman, Matthew Hall, Dan Zalkind, and John Jasa at NREL; James Allison
at the University of Illinois Urbana-Champaign; and Daniel Herber at Colorado State
University—are working to demonstrate the toolset’s capabilities to ready it for industry
use.

To ensure that the toolset will have a real-world impact, the team has set up an external
advisory board with members from General Electric, Glosten, Siemens, Shell, the University
of Maine, and other industry, university, and national laboratory partners.

“The collaborations have been a big emphasis. We’re not just developing a toolset,
but also trying to help industry develop lighter, lower-cost floating offshore wind
turbines,” Wright said. “Getting the toolset into our industry partners’ hands is
a big goal of the project.”

The open-source tool is publicly accessible and flexible enough to allow users to
incorporate their own models and inputs.

“One of the most exciting parts of the project thus far is that we’ve recently demonstrated
the toolset on a few benchmark case studies,” Wright said. “Two years isn’t a lot
of time to start from scratch and develop a big toolset, but we’ve done that and realized
very positive results.”

Electrification Takes Flight

Sreekant Narumanchi and his team are involved in multiple ARPA-E projects, including
one with General Electric on electrification of aviation (eFLITES). The project team
is adopting a multifaceted power electronics, electric machines, and thermal management
research and development pathway, shown here. Illustration from John Yagielski, GE Global Research Center

Sreekant Narumanchi—senior researcher and manager of the Advanced Power Electronics
and Electric Machines (APEEM) Group within the Center for Integrated Mobility Sciences
at NREL—and his group are involved in no less than seven ARPA-E projects at NREL. These projects are focused on power electronics, electric machines, and thermal
management, but there is also another common theme: collaboration.

“When a new opportunity comes along, we’re very proactive about reaching out to our
network to say, ‘Hey, let’s team up,'” Narumanchi said. “Our group has been very excited
about the collaborations we’ve developed.”

One of these collaborative projects, led by General Electric (GE), focuses on power electronics, electric machines, and thermal management for the electrification
of aviation
. The team is developing an ultrahigh-efficiency aircraft propulsion system to reduce
aviation-related greenhouse gas emissions, and Narumanchi’s group in particular is
focusing on developing an integrated electric drive for the hybrid electric aircraft
of the future. Ultimately, GE plans to develop a 2-MW, fully integrated all-electric
aircraft powertrain and demonstrate a 350-kW lab-scale prototype.

“ARPA-E has proven itself to be a pioneer in many areas, and the project with GE is
a good example,” Narumanchi said. “This is one of the first DOE-funded programs related
to electrified components in the context of aviation. ARPA-E likes to use the word
‘transformational,’ and they do walk that talk.”

In addition to the GE project, Narumanchi’s group is involved in six other projects,
ranging from exploring the limits of cooling for extreme heat flux applications (in collaboration with Stanford University) to developing power electronics for fusion applications (in collaboration with Princeton Fusion Systems).

Because ARPA-E funds projects that are not yet ready for private sector investment,
these projects help foster early-stage collaboration, setting the stage for fruitful
partnerships later on. Industry partnerships not only bring valuable capabilities
and expertise to NREL’s research, but also allow NREL to add value to projects led
by industry.

“Our group—and this is true in general at NREL—is always on the lookout for collaborations,
partnerships, and opportunities,” Narumanchi said. “Over the years, we’ve presented
to colleagues at DOE meetings, presented at other meetings, and have participated
in conferences and advisory boards. That exposure has expanded our spectrum of collaborators.
It’s very much a cumulative process.”

To learn more about NREL’s ARPA-E funded projects, see the 2022 ARPA-E Open Summit Fact Sheet. 

Exit mobile version